Key Features of Gypsum Bonding Agent
- Additional chemical or mixing not required.
- Better bond adhesion due to sand powder which contains fine aggregates for better mechanical, as well as chemical adhesion.
- Excellent cohesive bond to RCC, Concrete and other surface. Single coat application.
- Excellent high strength due to good spreadable properties.
- Economic.
- Faster to apply due to good spreadable properties.
- Non-toxic, non-inflammable.
- Simple and easy application.
Technical & Physical Parameters
| Setting Time | 24 to 48 Hrs* ( It depends on surface & enviromental condition ) |
|---|---|
| Color | Green |
| Bonding strength | > 1 Mpa* |
| Type | Colloidal solution with suspended solids |
Chemical Composition
Polymer based liquid
Drying Type
Air Drying
Identification & Packing
BONDAID is packed in plastic buckets. The outer layer of the bucket is prnted with the product image, safety instruction, batch number, date of manufacturing, UOM, correspondence address and application instructions.
Available Sizes
- 20 kg, 10 kg, 5 kg & 1 kg
Shelf life time
- Approx. 12 Months form date of manufacturing
Coverage
- Coverage* 50 Sqft/kg (It depends on surface & application)
Standard Compliance
- Testing procedure as per ASTM D7234
Caution
- Do not apply Bondaid on wet surface
- Wash hand properly with clean water after use.
- Keep away from eye contact, in case of eye contact wash throughly with water
- Use helmet & high viz, safety shoes & harness while working on height.
Surface preparation | Mixing | Application
- Clean the surface to remove dust and loose particles
- Any faults in the structure, particularly those which may lead to moisture penetration, must be rectified.
- Mix material properly with clean rod to properly distribute solid particles in the solution.
- Use good quality paint brush. the brush should be cleaned with clean water
- Application of bondaid must be done with the help of brush/roller
- Allow it dry throughly for around 24 hours
